close
Choose Your Site
Global
Social Media
Views: 0 Author: Site Editor Publish Time: 2025-08-14 Origin: Site
Ever tried removing wallpaper behind a TV mount? It’s tricky—but totally doable. Bad removal can damage your wall or ruin your setup.In this post, you’ll learn safe, easy ways to take off wallpaper around TV brackets. Perfect for DIY upgrades or fresh installs!
Thinking about installing a TV wall mount over wallpaper? Or maybe there's already one hanging there and you’re wondering if you can just leave things as-is. Let’s talk about why removing the wallpaper might actually save you trouble later—especially when it comes to your home’s look and your mount’s long-term hold.
Here’s why most people strip the wallpaper before mounting the TV:
The mount needs to anchor into the wall—not paper.
Wallpaper can hide cracks or moisture damage.
You get a smoother surface for new wallpaper or paint.
Old designs clash with your modern setup.
At Jieyong Industrial, we often see homeowners pairing a full motion TV wall mount with a new interior makeover. Skipping the wallpaper removal step usually leads to extra work later.
Yes, but it’s tricky.
Wallpapering around brackets takes lots of time. You have to:
Cut around metal parts
Avoid pasting over cables
Hope it all lines up when you’re done
And even then, you might end up with:
Visible gaps
Paste stains on the hardware
Loose edges around mount arms
We’ve seen many customers remove their tilt TV mounts just to get a clean wallpaper finish—only to remount everything again afterward.
Here’s what no one tells you:
| Problem | What Could Happen |
|---|---|
| Heat Buildup | The wallpaper may bubble or discolor |
| Moisture Trapped | Mold or mildew can form behind the screen |
| Glue Breaks Down | The paper may peel and sag around the mount |
Especially if your TV gives off heat—or if your room gets humid—those risks are real. And remember, once the TV is back up, you won’t see problems until it’s too late.
Mounting over wallpaper weakens grip. The screws press through the paper before hitting the drywall or studs. Over time, that tiny gap can:
Loosen the hold
Let dust or air seep in
Make the TV look off-center or crooked
Plus, wallpaper can wrinkle around mounts. That just ruins the clean, modern vibe you’re going for. If you’ve picked something like a TV cart stand from Jieyong’s product line, you probably want everything else looking just as sharp.
Removing the wallpaper gives you:
A solid surface for your screws
A wall that holds paint or fresh wallpaper better
A smoother space for hiding wires or outlet boxes
It’s easier to hide cables. Easier to adjust the mount later. Easier to avoid surprises behind the screen. Many Jieyong customers using our projector mounts also prep the wall first—just like this.
Before peeling anything off the wall, gather your gear. Stripping wallpaper near a TV wall mount can get messy fast—especially around brackets, cables, and tight corners. Having the right tools means less damage, fewer surprises, and way smoother progress.
These are the must-haves for getting the job done safely and cleanly:
| Tool | What It Does |
|---|---|
| Putty Knife / Scraper | Lifts wallpaper edges without tearing the wall |
| Scoring Tool | Pokes small holes so liquid or steam can soak in |
| Wallpaper Steamer | Loosens glue under thick or old wallpaper |
| Spray Bottle | Applies DIY mix or stripper evenly |
| Painter’s Tape | Covers outlets and hardware to keep things clean |
| Drop Cloth / Plastic | Protects floors from soggy scraps and splashes |
| Bucket and Sponge | Helps with scrubbing and rinsing walls after |
| Gloves, Goggles, Mask | Keeps your hands, eyes, and lungs safe |
If you’ve used one of Jieyong’s monitor mounts, you know how tight it can get behind brackets. These tools help you work around them without bending or scratching anything.
Let’s talk solutions. You’ve got a few choices for breaking down old wallpaper glue:
Liquid Wallpaper Remover: Good for vinyl-coated surfaces
Gel-Based Remover: Sticks to vertical walls longer
DIY Mix:
1 part fabric softener + 2 parts hot water
1 part vinegar + 1 part hot water
Both DIY mixes work well. Just spray, wait 15 minutes, and start scraping.
For the cleanup stage:
Dish Soap: Cuts leftover adhesive fast
Sugar Soap: Great for wall prep before repainting
Joint Compound: Patches old holes from anchors or screws
Primer: Seals the wall and smooths everything for a fresh start
If you’re prepping for a new speaker wall bracket, like the ones from Jieyong, using primer helps avoid bumps and peeling later.
Not required, but very helpful:
Step Ladder: Reach behind high wall mounts
Cable Clips or Boxes: Keep wires tucked away while you work
TV Screen Cover: Protects the screen from water, glue, and tools
The best part? Most of this stuff is reusable. Once you’ve got it, you can tackle your next wallpaper project or even hang a microphone stand setup in your recording room. Easy win.
Peeling wallpaper off a wall is one thing. Doing it around a wall-mounted TV? Whole different story. This step-by-step guide walks you through each part—from prep to cleanup—so you can work clean, stay safe, and keep your setup looking pro.
You don’t want water near outlets or paste on your floor. Get things ready first:
Turn off power to nearby outlets
Unplug and remove the TV if possible
If the mount stays up, cover the screen and cables
Tape over outlets and switches
Move nearby furniture or toss a cover on it
Drop cloths or plastic keep the floor mess-free
If you're working around a Jieyong tilt TV mount, protect the bracket edges to avoid scratching the wallpaper or tools.
Not all wallpaper removes the same. Test it before diving in:
| Wallpaper Type | What to Look For | Removal Difficulty |
|---|---|---|
| Strippable | Peels clean in big sheets | Easy |
| Peelable | Top layer peels, backing stays | Medium |
| Washable/Vinyl | Feels smooth, resists water | Hard |
| Traditional | Old paper, tears easily | Medium |
| Multiple Layers | Feels thick or uneven when scored | Hard |
Try lifting a corner behind the bracket. No luck? It's probably coated or glued tight.
Now it’s time to let your solution do the work—but first, score it:
Lightly roll the scoring tool across the wallpaper
Make tiny holes so steam or liquid can seep through
Avoid heavy pressure near screws, drywall anchors, or tight corners
Vinyl wallpaper won't absorb water unless it’s scored first. Around a Jieyong speaker wall bracket, keep scoring shallow so you don’t cut the drywall.
Pick the method that fits your wallpaper and setup. Some people combine more than one.
Great for old or thick wallpaper.
How to steam:
Fill steamer and let it heat
Hold steam pad on wallpaper 10–15 seconds
Scrape gently while it’s warm
Repeat if the glue holds on
Caution: Steam and wires don’t mix. Don’t aim at outlets or cable holes.
Works best on vinyl or washable wallpaper.
| Product Type | Best Use Case |
|---|---|
| Liquid | Large open wall sections |
| Gel | Vertical spots near mounts or cables |
Spray, wait 10–15 minutes, then scrape.
Budget-friendly and easy to make.
Popular recipes:
| Mix Type | Ingredients |
|---|---|
| Vinegar Solution | 1 part vinegar + 1 part hot water |
| Fabric Softener Mix | 1 part softener + 2 parts hot water |
| Baking Soda Boost | Add 1 tbsp to warm water mix |
Spray or sponge the mix, wait 15–20 minutes, then peel.
No fancy tools needed—just your scraper and patience.
Use around mount arms, cables, tight corners
Hold the scraper flat to avoid gouging
For tricky spots, warm with a steamer or wet again
Jieyong users removing projector mounts often use this method around narrow cutouts.
Now the real work starts.
Start at a scored corner
Pull slowly to avoid tearing
Use your putty knife to lift stubborn patches
Don’t yank near bracket screws—they can pull out
If there’s still paper stuck behind a fixed mount, gently cut around the metal and remove the TV later for a full cleanup.
Don’t skip this part. Leftover glue ruins new paint or paper.
Try one of these:
Hot Water + Dish Soap: Spray or sponge it on, then scrub
Commercial Adhesive Remover: Spray, wait 10–20 minutes, then wipe
Sugar Soap Solution: Finish with this before painting
Use a sponge or cloth for the final wipe. If you're planning to install a Jieyong TV cart stand next, your surface will be smooth and clean—ready for anything.
So here’s the big question—do you take off the TV mount before peeling the wallpaper, or work around it? There’s no one-size-fits-all answer. It depends on your setup, tools, and how much effort you want to put in. Let’s look at both sides.
| Option | Pros | Cons |
|---|---|---|
| Remove the Mount | Easy wallpaper access Cleaner finish | Takes time May need wall repair |
| Leave the Mount Up | Faster setup No need to move TV hardware | Harder to reach edges Risk of damage |
If you’re using a full motion TV mount from Jieyong, removing it gives better access to corners and cables. But if it’s a simple fixed bracket and you're in a rush, working around it could still work.
No way to take the mount off? You can still get the job done. Just follow these tips:
Slide paper behind arms using a narrow scraper
Cover metal parts to protect them from moisture
Spray DIY solution with a sponge instead of a bottle
Use cotton swabs or small brushes near bolts or edges
Got a Jieyong speaker stand nearby? Cover it too. You don’t want glue splatter on your audio gear.
Sometimes, it’s just easier (and safer) to let someone else handle it. Call a professional if:
Your TV is oversized or mounted high
The mount is connected to metal studs or concrete
You see cracked drywall or loose anchors
You plan to upgrade your entire home AV setup
Pro installers can take down your bracket, handle wallpaper removal, and remount your TV—especially helpful if you're switching to a TV cart stand or changing room layouts.
Cables and anchors can get in the way. Here’s what you can do:
Cable Channels: Remove if possible, clean behind them, reinstall later
Plastic Anchors: Leave them in place, work around them carefully
Loose Screws: Tighten before starting, or plug holes after
For mounts from Jieyong that include built-in cable management, make sure the clips stay dry. You don’t want glue or water getting inside them.
Peeling wallpaper behind a TV bracket? Tight fit, lots of cables, and plenty of things to scratch or soak. Let’s go over a few smart tricks to keep the job smooth—and your wall safe.
Sometimes it’s just easier to trim than tug.
Use a utility knife to score a clean edge around the mount plate
Angle your blade slightly to avoid cutting into the wall
Peel wallpaper away from the mount edge, not toward it
This method works especially well around flat, fixed Jieyong TV wall mounts. Keep your strokes short and slow.
You don’t want steam or glue remover dripping into your electronics. Here’s how to protect everything:
| Area | Cover It With |
|---|---|
| TV screen | Microfiber cloth or plastic sheet |
| Mount hardware | Painter’s tape |
| Surrounding gear | Drop cloths or towels |
Got a Jieyong earphone holder mounted next to your TV? Wrap it in plastic too. It keeps it clean and dry.
Glue gets sticky fast near holes and edges. To keep it under control:
Apply remover with a sponge instead of a sprayer
Use cotton swabs to soak tight spots
Wipe glue right away before it dries near brackets
Be extra careful where screws meet the wall. That’s where buildup likes to hide.
Working behind the TV or bracket arms? Here’s how to avoid wall gouges:
Use a plastic scraper instead of metal
Hold your tool at a shallow angle
Support drywall with your free hand when scraping
If you're dealing with a Jieyong monitor stand setup nearby, avoid bumping or loosening it while working.
Tiny spots need precise treatment. Don’t flood the area—target it.
Try this:
| Tool | Technique |
|---|---|
| Small sponge | Dab and press into corners |
| Cotton ball | Hold against seams to soak glue |
| Steamer wand | Use lowest setting near brackets |
Apply steam in short bursts, then let it sit. You’ll get better results without drenching your mount plate.
Wallpaper’s gone, but the job’s not done yet. Before you put your TV back on the wall, make sure the surface is solid, smooth, and ready to hold weight.
Small tears, screw holes, or dents? Cover them up.
Scoop joint compound onto a putty knife
Press into holes or gaps, level it out
Let it dry 100 percent before sanding
If you removed a Jieyong projector mount, check around anchor points. That area usually needs touch-up.
Now it’s time to flatten those patches.
Use fine-grit sandpaper
Move in circles to blend edges
Wipe dust off with a damp cloth
Uneven walls mess with mounting plates. Make it smooth so your Jieyong tilt TV mount sits flush.
Bare drywall or fresh joint compound? It needs sealing.
Choose a primer for drywall or repaired walls
Use a roller or brush, avoid overcoating
Let it dry fully before doing anything else
Primer helps your next coat stick—whether it's paint or a new wallpaper behind your TV cart stand.
Don’t rush. Wet walls are weak walls.
| Task | Wait Time |
|---|---|
| Joint compound drying | 6–12 hours minimum |
| Primer curing | 24 hours |
| Wallpaper glue removal | Overnight dry-down |
A solid wall = safe mount.
Before you grab your drill:
Recheck stud locations with a stud finder
Look for any soft drywall or flaking paint
Measure mount placement twice
If you’re switching to a new model—like a Jieyong full motion TV mount—use the wall template included. It saves time and keeps things straight.
Removing old wallpaper gives you a fresh start—and a chance to design a media wall that looks and sounds better. Great for home theaters, gaming setups, or anywhere a wall mount from Jieyong fits in.
TV rooms aren’t just about the picture. Sound matters too.
Choose wallpaper made with foam or fabric backing
Look for acoustic-rated wallpaper panels
Pair it with soft furnishings to lower reverb
If your Jieyong speaker wall bracket is mounted nearby, you’ll notice cleaner audio when the wall absorbs more sound.
Flat walls bounce sound. You want texture.
| Texture Type | Sound Absorption |
|---|---|
| Foam-backed vinyl | ★★★★☆ |
| Woven fabric | ★★★★☆ |
| Embossed paper | ★★★☆☆ |
| Smooth vinyl | ★★☆☆☆ |
Go for soft, raised, or layered designs. It helps dampen echo and makes your Jieyong floor speaker stand sound sharper and less harsh.
Large TVs cut into bold wallpaper designs. To keep things clean:
Choose vertical stripes for taller TVs
Keep bold prints away from screen center
Use neutral tones directly behind mounts
This helps the eye focus on the screen. It also makes your Jieyong tilt TV mount look more intentional, not stuck on randomly.
Nobody wants dangling wires. Plan your routes first.
Cut channels in drywall for hiding cables
Use flat HDMI or power cables if needed
Apply wallpaper over cable routes for seamless look
With Jieyong’s mobile holder or wall-mounted gear, pre-planned cable paths keep everything tidy and modern.
White outlets on dark wallpaper? Nope.
| Wallpaper Color | Best Cover Finish |
|---|---|
| Charcoal gray | Matte black or bronze |
| Beige or ivory | Brushed nickel or almond |
| Patterned wallpaper | Paintable covers |
Match outlet plates and cable ports to your wall so your Jieyong monitor mount setup looks clean from every angle.
Once your wallpaper is off and the wall is ready, design choices matter. Let’s break down the smart moves—and mistakes to avoid—when decorating around a mounted TV.
Choose non-reflective, heat-resistant wallpaper
TVs give off heat. Use wallpaper built for it. Matte finishes reduce glare from the screen.
Use discreet LED backlighting behind the TV
It reduces eye strain and highlights the wall without clashing with your design. Pair well with a Jieyong full motion TV mount for flexible setups.
Invest in durable, high-quality wallpaper
Go for thicker, washable types. They’re easier to clean and resist peeling behind brackets.
Select a bezel-less TV to complement wall design
Modern TVs with slim frames blend better. It helps your wallpaper stay the hero.
Plan the wallpaper pattern before mounting TV
Align shapes, prints, or stripes with where your TV sits. It keeps the wall balanced.
Use glossy wallpaper that causes glare
Shiny finishes reflect screen light. It’s distracting during movies or gaming.
Choose overly delicate or special-effect finishes
Metallics, glitter, or embossed paper? They can tear when mounting hardware like Jieyong monitor mounts.
Mount large, swiveling brackets on thin wallpaper
The pull and twist from heavy mounts can stretch or rip fragile wallpaper.
Leave adhesive residue behind the mount
Sticky patches attract dust and look messy if you move the bracket later.
Over-decorate the TV wall, keeping the focus clean
Too many shelves or wall art makes things cluttered. Let your TV cart stand shine without distractions.
| Tip | Why It Matters |
|---|---|
| Matte wallpaper | Reduces screen glare |
| High-quality material | Stays intact under mount pressure |
| Less wall clutter | Highlights the screen and bracket |
| Backlighting | Adds style and comfort |
Wallpaper removal seems easy—until it ruins your media wall. Here’s what to watch out for when working around a TV mount.
Jumping in without setting up? Not smart.
Unplug everything
Use painter’s tape on outlets
Lay down drop cloths
Skipping this step leads to mess, damage, and safety risks—especially around Jieyong’s fixed TV mount or cable slots.
Water and electricity don’t mix. Neither do hot steamers near wires.
| Area | Safe to Use Water/Steam? |
|---|---|
| Below wall plate | Yes, with caution |
| Directly behind TV | No, cover first |
| Near outlets/cables | Avoid excess moisture |
If you're working behind a Jieyong speaker bracket, disconnect the hardware first. Cover everything.
Wet walls don’t hold paint—or mounts.
Wait 24+ hours after removing glue
Test dryness by pressing tissue on the wall
Use a fan if you’re short on time
Moisture trapped behind new paint causes bubbling or peeling, especially under Jieyong full motion mounts.
Even if you don’t remove the TV, protect it.
Drape a soft towel or plastic over the screen
Avoid spray drifting upward
Wrap mount arms or exposed brackets
That saves your screen from splashes, and your Jieyong mount system from getting rusty or sticky.
Pulling wallpaper too fast? You’ll rip the drywall or strip paint.
Always score first
Let solution soak before peeling
Scrape gently near screws and anchors
Be patient, especially when working near bracket holes or anchor points. That’s where walls crack most.
A: Yes, but it’s harder. Cover the screen, protect cables, and work gently around the mount using tools like a scraper or gel remover.
A: Use a gel-based wallpaper remover. It sticks to smooth vinyl and works better in vertical areas behind TV mounts.
A: Unplug it first. Cover the screen with plastic or cloth. Tape over vents and ports to block moisture and dust.
A: Not recommended. It leaves gaps, causes peeling, and looks messy. Remove the bracket or trim carefully around it.
A: They often remove the mount, label cables, and use steam or chemical removers. They protect electronics and repair surfaces before reinstalling.
A: It might if overused near outlets or wiring. Use low settings, avoid direct heat on electronics, and dry the area quickly.
A: Wait at least 24 hours. Let the wall dry fully before sanding, priming, and reinstalling your Jieyong TV mount.
Removing wallpaper for a TV wall mount takes prep, patience, and the right tools. Rushing can lead to damage or poor results. For tricky jobs, it’s smart to call a pro. Take time to do it right—your walls (and mount) will thank you. After removal, smooth and prime the wall so your next setup looks clean and lasts longer.
